Tree Roots Growing From Under Toilet Flange?? - Love Plumbing …
2009年5月27日 · We are doing new floor tile in both bathrooms and when the master bath toilet was removed, we found lots of tiny tree roots growing up alongside the sewer pipe and out from underneath the toilet flange. The roots are on the outside of the sewer pipe and coming up thru the sewer pipe hole in the concrete foundation.
Is using a 3" inside toilet flange a viable option?
2024年7月2日 · Sioux Chief 3" PushTite™ Toilet Flange Model Number: 888-GPM could be worth considering. I would want a stainless steel ring on a flange glued in, but for a push-in flange, a plastic ring failure (unlikely) could be replaced by replacing the push-in flange.
Toilet Flange won't go all the way in drain pipe
2020年8月23日 · I'm installing a toilet in a bathroom basement. The drain pipe is 4" and the flange is designed to fit inside it. I cut the drain pipe flush with the floor. I dry fit the flange about half way, pulled it out and primed/glued it back in only it wouldn't go all the way down. It sat about 1/2" off the floor and I couldn't get it to go any farther.
Rear outlet toilet flange. any ideas? - Love Plumbing & Remodel
2019年9月1日 · That is the absolute minimum that the flange can project from the wall. Use a straight edge across the back of the toilet to measure that distance from the plane of the back of the toilet to the plane of the face of the flange. Then I would suggest that the flange can be at least 1/4 inch further into the room to give the gasket some squish.
Schluter Ditra and Toilet Flange Questions - Love Plumbing
2020年2月19日 · Hi All, Working on my first bathroom renovation, my 2nd tiling job (first was a fireplace hearth), and first plumbing job ever so I apologize for my amateurish questions. I removed the hardwood flooring in this 1/2 bath and already put down Schluter Ditra XL and Schluter All-Set over the...
Removing "plug" on Oatey TKO flange - Love Plumbing & Remodel
2012年2月21日 · OK, it seemed simple enough: I bought an Oatey TKO toilet flange with the stainless steel swivel ring on it. I wanted to remove the test seal molded into it because I'm just replacing the bend and the flange, and no test was going to be performed. So simple, even a picture is on the label...
Proper toilet flange orientation - Love Plumbing & Remodel
2018年9月14日 · Charlotte's metal ring toilet flange's PVc was about 5" wide and sat below the metal flange. Oatey's 3" or 4" easy tap stainless steel flange has the PVC sitting just a little below the metal ring. Probably about 4 1/2" wide. Souix Chief's PVC …
How to remove and replace rusted toilet flange?
2018年7月29日 · In terms of replacing the toilet: (1) Use TWO nuts on the closet bolt. The first one bolts the bolt to the flange, the second one (with a washer) bolts the toilet to the bolt/flange. Closet bolts with two nuts are available in better places. Or just buy a suitable extra nut for each bolt. Real solid brass or stainless is what you want.
4" or 3" Water Closet (Toilet) DW pipe - Love Plumbing & Remodel
2019年6月14日 · Is there any reason I would NOT want to use 4" pipe all the way to the toilet flange. I could reduce it down to 3", but it is just as easy to keep it 4" and uses less fittings (no need for a 3" to 4" reducer). Is 4" ok? As for the vent, that is …
Lead toilet flange and bend - Love Plumbing & Remodel
2019年3月1日 · Replacing leaking toilet. Pulled 1 of 2 floors supporting toilet. The flange coming out of floor seems to be lead? I had to tap it away from flange to get flange off, looks like it was soldered in a couple spots. It connects to a copper pipe in floor. Is it ok to put back flange on new floor & form the lead pipe back over flange?